The Hidden Secrets Of Buying An Air Conditioner
An air conditioner can be an important addition to the home. Aside from being a summer necessity in some areas, installed air conditioning can be a selling point when a home is on the market. There are a number of factors to consider when making important purchase.
Size Matters
Probably the most important step is to calculate your heating and cooling needs so that you can be sure to find the most effective solution. Is the air conditioning needed for the entire house, or mostly for a single room? Additionally, how often will it be used? If air conditioning is only needed occasionally for a small area, a temporary in-window model might be more appropriate, as it can be removed when not necessary. On the other hand, if permanent air conditioning is needed for the entire home, a central air system might be needed. The primary factor to consider when purchasing a new air conditioner is its cooling capacity, which is measured in British Thermal Units (BTUs) per hour. Air conditioners work by removing moisture from the air as the warm air is forced past cold coils. Cooling capacity is the amount of heat and moisture transferred from indoor air to outdoors, so the higher the BTU, the more powerful the unit. A common mistake made by many consumers is buying an A/C that is simply too big in terms of BTUs. A lot of consumers think the largest unit is the best way to go, but that's not necessarily true. An oversized air conditioner can leave rooms cold and clammy. It may also only run for short bursts of time because the indoor coil never gets cold enough to remove moisture from the air. As a result, oversized units cool -- but do not dehumidify -- the air, reducing air quality and aggravating allergies. In addition, oversized air conditioners tend to turn themselves on and off more frequently than properly-sized units, so they can run up your electricity bill. Air conditioners are most efficient when they run continuously for a long period of time. Lastly, because an oversized unit will be powerful enough to cool your house under almost any condition, an A/C that is too large may keep you from noticing other problems, such as leaky ducts, constricted air flow, dirty filters, neglected coils or improper refrigerant charge. These problems can quickly become very expensive, and should be fixed as soon as possible. Oversized units also tend to be louder. To determine what size air conditioner is right, you will have to measure the square footage of the room(s) it will need to cool. As a general rule of thumb, a room that is 250 square feet or smaller will need an A/C unit with about 5,000 BTUs, at a cost of about $250. Rooms larger than 550 square feet generally will require more than 11,000 BTUs, at roughly $500.
Your Energy Bills
With an idea of the size of air conditioner needed, you should next consider energy costs. Air conditioners can use a significant amount of power, and some units are more energy-efficient than others. Comparing models to find which one saves the most energy while still performing effectively can save a significant amount on monthly power bills. Check the labels: most list the capacity of the model in BTUs and give an idea of how energy-efficient the unit is. The more BTUs, the greater the capacity of the unit. Additionally, some utility companies offer cash incentives to customers purchasing energy-friendly appliance replacements. Energy costs can make a huge difference when considering different air conditioners. While energy-efficient units tend to be more expensive than less productive counterparts, the utility savings may make the extra expense worth your while. Consumers can save anywhere from 10-40% percent in utility costs by using a high-efficiency air conditioner. The level of savings depends on what type of climate you live in, how big your home is and whether your A/C unit is properly sized. Because the energy efficiency of air conditioners has improved so greatly in the past three decades, current units can save an average of $26 per year in energy costs compared to air conditioners built in 1980. Consequently, even if your older model A/C is still working for you, you may want to consider replacing it with a more current model to save electricity costs. However, proper maintenance should keep your unit efficient.
The Air Conditioner and Your Home
Ceiling height, the number of windows and the amount of direct exposure to sunlight could also affect the amount of BTUs needed. People tend to think that an air conditioner is a cure-all, but there are a number of different variables that go into room temperatures. If you have windows that are heavily exposed to the sun, for instance, they may be admitting excessive heat into your home. Install blinds or opaque curtains on these windows during the day, or consider outdoor shading devices such as trellises or awnings. Leafy trees and vines can also provide shade, reducing indoor temperatures. If your North Carolina home has an attic, make sure it is well insulated. Attics and crawl spaces are exposed to extreme outdoor temperatures and can become as hot as 115 degrees. If that hot air leaks into the rest of your home, your air conditioner will have to work harder to cool the house down. Also close off unused rooms, so the air conditioner has less space to cool. When setting up your air conditioner, make sure the air flowing in or out of the unit is not blocked by drapes or furniture. And take care that the area around the air conditioner is sealed and won't leak in hot outside air. Finally, clean and replace the air conditioner's filter at least once a month. Dirty filters block the air flow, making A/Cs work harder.
If you are looking for a professional Asheville HVAC company in North Carolina, please call us today at 828.254.0206 or complete our online request form for an in-home consultation.
|